Eli5 Rock climbers/climbing enthusiasts

290 views

Eli5 When you’re rock climbing and having to use safety gear and tie yourself off when climbing, how do you get all your equipment back when you’re done climbing. Do you just get your rope back and have to leave all your anchors there?

In: Other

2 Answers

Anonymous 0 Comments

What you are describing is called Traditional Climbing (usually shortened to ‘trad’), where safety gear that anchors into the rock (‘protection’) is placed as you climb.

How you recover your protection depends on the route as it can go a couple ways, mainly depending if this is a multi-pitch climb and whether you can just walk back down via some other route from the top of the climb.

1. If its a multi pitch (you climb multiple lengths of your rope up), what happens is the lead climber goes up and is placing protection the whole way. At some point they stop, set up an anchor and take over belaying for their partner who ‘follows’ them up and is removing the gear as they climb. They might overtake the original lead and keep climbing or switch positions at the anchor.

2. Its a single pitch and you can just walk down from the top. Similar to multi-pitch, the leader goes up placing safety, they top out, setup anchor and start belaying, the follower follows and cleans the route as they go up.

3. Its a single pitch but you cant just walk off from the top. This one is more complicated (mainly in execution) and requires some gear to be left behind as an anchor. If you are climbing in well-known areas, typically there is some dedicated permanent anchor at the top for this purpose. What happens is you set up the anchor and the belayer lowers you back down, while you clean up after yourself. If you have to bail halfway, then you are going to be leaving whatever protection you need to build an anchor behind as crag booty for some lucky climber to find.

You are viewing 1 out of 2 answers, click here to view all answers.