What are millibars and why are they used to measure hurricanes?

447 viewsOtherPlanetary Science

And why is a rapid DROP in them bad?

In: Planetary Science

15 Answers

Anonymous 0 Comments

It’s a unit of atmospheric pressure. Hurricanes happen when a low-pressure system in the tropics builds up and starts to spin and gets fueled by warm air/water coming in. Lower pressures draw in more air/water and correlate to larger storms.

So when the pressure in the eye drops significantly, the storm is going to intensify soon after.

Anonymous 0 Comments

A millibar is a unit of air pressure. It’s related to the SI unit for pressure (Pascal). 1 millibar is 100 Pascals. The highest air pressure ever recorded in weather is 1083 millibars and the lowest ever recorded is 870 millibars. All the weather known to humans is in between those two numbers so millibars is a convenient unit for tracking the changes up and down.

Low pressure is associated with storms (the big L’s on a weather map). High pressure is associated with clear skies (the big H’s on a weather map).

When a storm, already known to be low pressure, has its pressure dropping very rapidly, that means that the storm is getting stronger.

Anonymous 0 Comments

Millibars are simply a metric unit of pressure, the atmosphere normally sits at one bar.

When a cyclonic storm forms you get low pressure in the centre and this causes air to move inwards. Due to the rotation of the planet, it causes this air to rotate as it heads inwards. The lower the pressure in the centre, The faster it will draw in air and the faster the air will spiral inwards.

This low pressure also lifts the ocean up, like someone sucking on a straw and can cause tidal surges.

Anonymous 0 Comments

Bar is a measure of air pressure. 1 Bar is typically slightly less than the atmospheric pressure around sea level.

A millibar is thus 1/1000th of a bar.

Generally, one of the signs of a hurricane is a sudden drop in air pressure, and the level of the drop can indicate the severity of the incoming storm. Thus, if you are watching out for potential weather events on the horizon keeping an eye on air pressure is quite important.

Anonymous 0 Comments

A millibar is one thousandth of the normal barometric pressure at sea level. The lower the number, the lower the barometric pressure in the eye of the storm, the more severe the storm.

Anonymous 0 Comments

A bar is a unit used to measure pressure, similar to how a meter is a unit to measure distance. 1 bar is slightly lower than the average pressure at sea level.

A millibar is 1/1000 of bar, similar to how a millimeter is 1/1000 of a meter.

Gasses will move from an area of high pressure to low pressure, which causes wind. When the center of a hurricane suddenly drops in pressure by a lot, it is able to draw in more air, faster, causing a bigger hurricane.

Anonymous 0 Comments

890 millibars is 0.89 bar. Normal atmospheric pressure is 1 bar. So 890 mb is 89% of normal, 11% low.

Anonymous 0 Comments

Bars are a standard unit used in measuring air pressure. Millibars are 1/1,000 of a bar. The measure of 1 Bar is average pressure at sea level.

Weather patterns, and particularly storms are tracked and predicted by changes in air pressure. An approaching storm is always preceded by a drop in air pressure. The eye of a hurricane is very low pressure and it is the primary structure that holds the hurricane together. The center of a tornado is extremely low pressure.

Low pressure isn’t what causes things so you should not look at it like that, it is just an indicator. As a storm gathers up energy it evacuates much of the surrounding area, pulling in air, which causes the low pressure. The extreme case of low pressure is the tornado where the low pressure center is caused by the tornado attempting to create a vacuum. In turn the vacuum pulls it back in and the result is a vortex structure.

Community, please correct my mistakes, I am not an expert on this stuff.

Anonymous 0 Comments

* Bar is a unit of pressure, like psi, pascals, etc. 1 bar = 1000 mbar (so 1 mbar = 0.001 bar. It’s like meters and mm)
* The storm and its wind intensity are driven by a difference in air pressure between inside and outside. The bigger the difference in pressure, the stronger the wind as air is sucked/pushed from high to low P regions.
* The outside surrounding air pressure is what it is, so for a storm in a given region, the greater the DROP in air pressure inside the storm = the bigger the difference in pressure between outside and inside = the stronger the winds.

Anonymous 0 Comments

A bar is a unit of pressure. A millibar is one-thousandth of a bar.

For reference, the following are all ways to write the air pressure at sea level in different units:

1 atmosphere (atm)

1.013 bar

1013.25 millibar

101325 pascal (Pa)

14.696 psi

760 mmHg

As for why we have so many different units to choose from, it depends on the thing we want to measure and historical context. Measuring the outside air pressure in pascals is impractical since the numbers are big. For example, you wouldn’t want to measure the distance to the store in centimeters. bar, millibar, and pascal are all metric units, which are the standard in scientific fields. psi is often used in imperial countries for pressurized objects.

I’m not a meteorologist, but generally a region with lower than normal air pressure is likely to develop bad weather. Air flows from high to low pressure (wind) so any clouds that wind picks up is pushed towards that area of low pressure.