I know it has to do something with speed and rotations but idk
In: 0
First of all: what if the car didn’t have gears.
Well, then the wheels would only rotate as fast as the engine. But engines have ranges of rotation speeds they work best at, they don’t like rotating too slow or too fast. So you introduce geara to adjust the wheel speed and engine speed.
Ultimately it’s just a question about gears (as in, the spinning toothed wheels) ratios, and gears are just levers. I hope you’re familiar with levers, i.e. the further from the anchor point you are, the less force you require to move something, but the more distance you need to move the lever.
So yes, there’s speed and there’s torque. Speed is related to the distance of the lever, in higher gears in the car you’re pushing on smaller levers, so you can rotate them faster, but you need to use more force for it. Torque is the force the engine exerts on it.
In low gears, the wheels will rotate much slower than the engine (longer lever), but it allows the engine to get the car going (if you tried to do it without gears, the engine wouldn’t have enough force at low rotations to do it and would just stall), go uphill or to tow something heavy because it takes less effort from the engine.
As you shift up, you get the wheels spinning faster and so require more force to do it, but you also allow the engine to stay in its comfort range and be able to provide that force. So again, if you tried to drive slowly in that gear, the engine would stall because it would need to rotate too slow, below its comfort zone.
Of course you can skip the higher gears and just run the engine really fast, but it’s still not going to be optimal (it’s going to lose power) AND it causes wear and tear.
Latest Answers