I was speaking to someone who belays a heavy climber. When the heavier climber falls, the belayer gest pulled into the air. I asked how they don’t get stuck in the air and the belayer said to get back to the ground, they start putting slack through as if they were lowering the climber, but it lowers them to the ground, and then when they’re on the ground, they carry on feeding the rope through in the same way and it lowers the climber.
​
Why does the slack lower the belayer first, and what makes it change to lowering the climber once the belayer is back on the ground? All I can find from searching is that friction makes it possible to belay someone heavier, which makes sense, but why does letting slack out work differently when the belayer is off the floor?
​
Is it because the belayer is close to where the most friction is (so the belay device), and when they’re no longer putting weight on it (so they’re stood back on the ground) , the slack makes it past the belay device and up to the climber?
Edit: Thank you so much for the replies everyone! If I’m understanding correctly, there’s not so much friction on the belayer’s side, so letting out rope makes them descend first due to the lack of friction, and there’s more friction on the climber’s side because the rope goes through the belay device and carabiners.
In: 43
Because the protection between the belayer and climber is adding friction. The belayer hanging on the device feels no addition friction between them and the brake, so when they try to lower, they will usually lower first. It’s not until they hit the ground and can partially unweight their end that the climber’s weight will pull out slack.
Latest Answers