title
In: Technology
This is because back in the day, the old stye wiring made an audible noise when electricity was flowing through it.
These days, lighbulbs usually have a small device which makes this noise, purely for nostalgic reasons.
The big, high power lights used for things like football stadium lighting or lighting very big spaces like a parking lot?
They’re a form of arc-lamp. There are two connections inside the glass bulb, but not with a wire between them.
At switch-on, a very high voltage (tens of kilovolts) is generated by the light fitting, and sparks across the gap between the two connections (the clunk and the buzz). Once this has happened for a second or two, the gas inside the glass will conduct electricity. The fitting then provides a lower voltage (but lots of current) and the spark (arc, to use the correct term) remains present. The gas mixture inside the bulb responds to the heat generated by the arc and glows very brightly indeed, thus providing the light from the fitting.
They’re used because they’re relatively energy-efficient, although modern large LED fittings are beginning to replace them.
https://en.wikipedia.org/wiki/Arc_lamp
If they’re fluorescent, it’s an old style ballast, a bimetal strip that helps them start. Fluorescent tubes need a lot of power to get going, then very little once they’re lit.
[This video ](https://youtu.be/hjphxq9nUrA?si=ci3zrZqpfF3VjAb6) by Big Clive explains how both the old ones and new solid state ones work.
Latest Answers